Test Module Projects

Pin Height Inspection Module

The customer required an inspection module to measure the height of pins in an assembly. The machine was capable of measuring 8 different variations of parts. Module was an 8 station custom dial. All measurements were captured and downloaded to SPC system.

Work performed:

- Mechanical and Controls Engineering
- Manufacture parts
- Assembly, Debug and Installation

Automated Thread Inspection for Wheel Bearing Housing

Customer wanted us to build a module that would automatically inspect threads in a steel housing. The conveyor was loaded from the machining center to a conveyor that transported the housing to a servo driven thread inspection device. The computer system would monitor the torque of the servo motor as the thread gauge was run through. The tooling also inspected the hole chamfer´s.

Work performed:

- Mechanical/Controls Engineering
- Manufacture parts
- Assembly, Debug and Installation

Inspect and Gauge Machined Component

Customer wanted to inspect parts that were machined at their facility prior to shipment to their customer. The machine has the capability to cycle at 60ppm. The parts were fed out of a vibratory feeder bowl down a gravity track to the inspection stations. Inspections included: Gauge ID with LVDT, measure height using a laser probe and inspect for features present using vision.

Work performed:

- Mechanical Engineering
- Manufacture parts
- Debug and Install

Semi Automated Inspection Machine For Spacers

An operator loads spacers to an incline. An escapement stops the part and it is automatically measured for the overall length.

Work performed:

- Mechanical Engineering
- Manufacture parts
- Debug and Install