AMi - Automation Equipment - Great Lakes Automation Services, Inc./AMi (GLASi)

AMi Products

AMi Product Case Studies

AMi Rotary Dial Chassis

The AMi brand rotary dial cam-driven chassis´s are specifically designed for customers who require assembly and test equipment for high volume small parts. The AMi chassis never becomes obsolete and can be retooled and refurbished over and over to accommodate changes in your product design, or to assemble a completely different product.

Standard features include:

Cam driven motion for dial index and tooling.
Cycle rates up to 70 parts per minute single tooled.
Overload protection on dial index, pick and place and probe devices.
Tooling is interchangeable between the three (3) chassis´s which minimize cost for spare parts.
Standard tooling and spare parts are readily available in 24 hours.
Over 1000 different combinations of standard tooling, i.e.; pick and place, probes, shuttles, orient tooling, conveyors, lift mechanisms, etc.
Time to market is kept to a minimum since the chassis and tooling are pre-engineered.

AMi Brand Rotary Dial Equipment

The AMi brand product line consists of 3 standard cam driven rotary dial machines referred to as the; AMi/1, AMi/2, and the AMi/4.

Each machine utilizes standard off the shelf tooling for pick and place, probe, orient, shuttle and lift just to name a few. These tooling packages are interchangeable between the 3 chassis´s.

Cycle rates range from 10cpm to 70cpm depending on the application.

The AMi product line has been in existence since 1973. There are over 800 machines in the field.

The AMi assembly machine never becomes obsolete.

There have been hundreds of machines retooled because of product design changes or machines have been completely rebuilt for a brand new product.

A Service Disabled Veteran Owned Small Business ~ Cage Code: 45RG9

AMi Products

AMi Product Case Studies

AMi Rotary Dial Chassis

Standard features include:

AMi Brand Rotary Dial Equipment

There are 3 Styles of AMi chassis´s: